|
AEMs Serial Gauge plugs into the companys Programmable EMS and has
the ability to read 19 channels simultaneously to provide reference for
all outputs, including boost, AFR, EGT, H2O, IAT, knock, volts, RPM,
vehicle speed, and more! Since it can read all channels at once, AEMs
Serial Gauge eliminates the need to buy a cluster of gauges, or you can
link multiple Serial Gauges together to monitor additional channels or
to divide your readouts across a few gauges.
The Serial Gauge includes a user-selectable LED display allowing users
to set vehicle specific limits, warnings, display ranges and operating
ranges. This unit runs the standard EMS datastream by default, and
includes 12 preset channels and seven user-selectable channels that are
custom-configurable through the PC interface, allowing you to monitor
practically anything attached to a sensor. AEMs Serial Gauge includes
user-programmable MIN/MAX storage for EVERY channel and records MIN/MAX
values even if you are not using the functionif its in the stream the
gauge records it. Red, yellow and green LEDs and the center three-digit
display are fully user-programmable as well, making this a truly custom
configurable unit. Users can set alarms for each channel so that when
the signal exceeds a value the Gauge notifies you by flashing all LEDs
and switching to the channel where the value was exceeded.
User-selectable qualifiers eliminate false warning lights, and the unit
includes two outputs to trigger ancillary warning lights based on user
selectable conditions. The Serial Gauge also includes user-selectable
alarm priority in the event multiple alarms sound, allowing you to set
alarm readouts in your order of priority.
AEMs Serial Gauge includes interchangeable silver and black
bezels and pin guides, and black and white faces for a customizable
look. Quick-Connect technology allows you to install the gauge and
connect the wiring separately for easy installation and less chance of
damage to the circuit board. The Serial Gauge includes a harness,
wiring to connect to the EMS, a daisy-chain adapter for linking
multiple gauges to one EMS and software for a trouble-free installation.
 | Monitor 19 channels simultaneouslyits like having 19 gauges in one! | | Works with AEM Programmable Engine Management Systems Only | | All necessary hardware and software included for installation | | User-programmable datastream channels (PC interface) | | User-programmable MIN/MAX values for every channel (PC interface) | | Includes two input buttons for scrolling through displayed channels and for clearing MIN/MAX values | | 24 user-programmable LEDs and three-digit center display (PC interface) | | User-selectable alarm values include qualifiers to eliminate false warnings | | User-selectable alarm priorities in the event multiple alarms are triggered | | Two outputs included to trigger ancillary warning lights or other devices (lights not included) | | Silver and black bezels and pin guides, and black and white faceplates included for creating custom look | | Quick-Connect technology eases installation | | Standard 52mm gauge housing fits in most pods and can be remotely mounted virtually anywhere |
|
