Energy Suspension Control Arm Bushing - Honda Civic 01-05

*Chevy Cobalt/Ion*

*Honda Civic 01-05*

*Lexus IS-F*

*Lexus IS250/350*

*Lexus IS300*

*Scion tC 05-10*

*Scion tC 11+*

*Scion xA/xB*

*Scion xD*

Cleaners & Waxes

DIY/Fabrication

Engine Management

Engine Oils & Additives

Exhaust

Forced Induction

Graphics

Safety & Seats

Transmission

Turbochargers

Water Injection

Wheels by Enkei

[Forum Specials/GB's]

[Garage Sale]

[Gift Certificates]

[Inventory Blow Outs]

Dezod Motorsports Alpha Series Tuner Turbo System-tC 05-10 (No fuel or engine management)

Dezod Motorsports AEM FIC Plug-N-Play Harness-IS300 01-05

Dezod S1 Scion tC Turbo System 05-10

Dezod Motorsports Bar & Plate Universal Intercooler-6 1/2" H x 27" W x 3 1/2" D (2.5" Inlet/Outlet)

Motul DOT 5.1 High Performance Street Brake Fluid (1/2L Bottle)

Dezod Motorsports Catalytic Converter Equipped 4-1 Header-tC 05-10

GReddy Ti-C Universal Muffler

NGK Copper R5672A-8 (2 Steps Colder; Set of 4)

Schroth Rallye 3 Street Legal ASM Harness

>*Honda Civic 01-05*>Suspension/Chassis >Bushings

Energy Suspension Front End Control Arm Bushing Set-Civic 01-05 D17 Engines

click to see larger image

Name:	Energy Suspension Front End Control Arm Bushing Set-Civic 01-05 D17 Engines
Your Price:	$49.00

Serial Number:	16.3116

Energy Suspension Control Arm Bushing - Honda Civic 01-05 - Front End

Performance Polyurethane
Control Arm Bushings For Front & Rear

-For both front and rear of suspensions on cars, trucks and SUVs.

-Maintains proper alignment under extreme conditions on and off -road and during competition.

-Improves vehicle handling, cornering and overall control.

-Full floating, for smoother operation.

-Made of Energy's HYPER-FLEX" performance polyurethane to add performance and durability.

On the front of vehicles they make a dramatic improvement in the way they handle, with quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster and camber) is better maintained by the use of the correct performance durometer of the bushing's material formulation.

On the rear, these control arm bushings are a must for controlling wheel hop and increasing cornering control for competition uses as well as maintaining alignment on and off-road.

All of Energy's control arm bushings are full-floating and non-binding... especially important when ride height is altered or greater suspension load is required. Most are pre-lubricated. This is especially important for both lowered and raised vehicles that have had drastic suspension geometry modifications. Energy's HYPER-FLEX" performance polyurethane control arm bushings do not rot or deteriorate from oils or atmospheric conditions such as ozone, smog, road salt, chemicals, and other corrosives. They will not deteriorate in a few short years and cause that mushy, uncertain steering response- like rubber O.E.M. ones often do. Most sets come with zinc plated outer metal shells. Available in red or black

The Problem- Weak rear control arm bushings will flex so much during launching damage can occur to the drivetrain over a short time.

The Cure- durable HYPER-FLEX" polyurethane will flex but hold the rear drivetrain system in proper alignment.

Color:

Product Reviews

Write an online review and share your thoughts.

Front End Control Arm Bushings, 05 Oct 2008
by matt from California United States
i just installed the front end bushing kit. It was a lot of work but, im really happy that I got them. The oem bushing were surprisingly soft. I notticed a dramatic diffrence in the feel of my car right away. The steering is more precise then befor. I also notticed that there is less abrupt weight transfer while making a sharp turns. The over all job was rather straight forward, the job took me a little over 4 hours to finish. However, unless you have access to a full garage with lifts, a hydraulic press and a wide assortment of tools, this is definitely not a DIY project.