|
75� H-type shoulder harness. All 3"belts are SFI homologated. Warning:
It is strongly recommended that the shoulder harnesses are fitted as close to horizontal as possible. It is a must that the angle of the shoulder harness does not exceed 45 degrees in relation to the theoretical horizontal axis of the mounting points. It is recommended that the harnesses be mounted to the fixing points suggested by the car manufacturer. The fixing points should always be reinforced by a steel plate fitted on the outer side of the car, not by welding or pop riveting. After an accident or a heavy crash, it is a must to replace the harnesses and carefully re-check their fixing points in the car. Belts do not have to be in contact with parts which can damage it. Should the belt show any wearing or cuts, it must be immediately replaced.
|
