|
FREE SHIPPING
As of 1/25/2011 all
MV Series wastegates (MV-S and MV-R) will now come with all springs available (6
for MV-S and 7 for MV-R).
Each unit will come
with the highest bar pressure installed in the gate, and the three extra (four
extra for MV-R) in the box with the unit.
Included
with every Tial MV-R
MV-R Assembly
2 TiAL -4 removable water fittings
MV-R Valve Seat
Inlet V-band clamp
Inlet Flange
Outlet V-Band Clamp
Outlet Flange
2 TiAL Air Fittings
Plugs for unused air ports
-
High temp NiCrFe based alloy is used for valve and 347SS valve housing
will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure
at high temperature, resist "relaxing" at temperature to
900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve
bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).
-
3 lower ports and two top ports for easy install, no need to rotate the
actuator top at all, plugs included for unused ports.
-Ultra
compact design fits in very tight spaces, the unit stands only 4.17"
tall, more compact than any other 44+mm external wastegate on the
market today.
- V-Band inlet and outlet make install easy, flanges and clamps are in the box!
-
Integrated -4 AN water cooling ports that cycle a small amount of
coolant through the actuator top to keep the temperatures down in
extreme conditions such as road racing. These are leak tested after
installation from the factory and can be removed if not utilized.
|
