Latest Products in Chevy Cobalt/Ion

ARP Head Stud Kit-GM 2.0/2.2L Ecotec 06-11 - $ 136.50

ARP Head Stud Kit-GM 2.0/2.2L Ecotec 06-11

PRICE :$ 136.50
It so for good reason that virtually every top professional engine builder relies on ARP Pro Series head for their all-out competition powerplants. Simply stated, there's not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Then, each stud is placed vertically in special racks and precisely heat-treated to 190,000 psi. this procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the "stretch" of both studs, which makes for a more consistent clamping force-and one that compensates for engine sealing! ARP head stud kits are available with your choice of conventional hex nuts or compact 12-point nuts. Premium quality parallel ground washers are also included with each kit. Clearly, they are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

K1 Technologies H-Beam Connecting Rods-Cobalt 2.4L 05-10 - $ 399.00

K1 Technologies H-Beam Connecting Rods-Cobalt 2.4L 05-10

PRICE :$ 399.00
K1 rods - H Beam Performance Connecting Rods -

Billet 4340 Steel H Beam connecting rods. Closely monitored material mechanical properties for optimum performance. Designed and finish honed in the USA. Sizes held to some of the tightest tolerances in the industry, +/- .0001” and +/- 1 gram per end. Shot peened for improved fatigue life. Bronze wrist pin bushings. Exclusively using ARP 2000 fasteners.

1) How much power can they hold?
Well, we have customers make up to 550whp on these with no issues. Tuning is what's going to make or break a rod. Nothing more, nothing less.

2) Are they shot peened like rod x?
Yes they are! They also have bronze wrist pin bushings and APR 2000 rod bolts that can be upgraded to a higher strength rod bolt per your request.

3) Why are they cheaper than rod x?
Well as we all know, foreign steel is much cheaper than domestic steel. The steel used to make these rods is a specific grade 4340, which is to K1's specs. Cheaper raw materials = cheaper production cost, which equals less of your hard earned dollars to get the job done.

4) Is it true you guys, single handedly commissioned K1 to make these rods for this community?
Yes we did! We also did the same for Wiseco pistons too.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

K1 Technologies H-Beam Connecting Rods-LSJ Cobalt/IRL 04-07 - $ 399.00

K1 Technologies H-Beam Connecting Rods-LSJ Cobalt/IRL 04-07

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

Latest Products in *Chevy Cobalt/Ion*

ARP Head Stud Kit-GM 2.0/2.2L Ecotec 06-11 - $ 136.50

K1 Technologies H-Beam Connecting Rods-Cobalt 2.4L 05-10 - $ 399.00

K1 Technologies H-Beam Connecting Rods-LSJ Cobalt/IRL 04-07 - $ 399.00

Latest Products in Chevy Cobalt/Ion