AEM 4-Channel UEGO Controller - $ 525.00

AEM 4-Channel UEGO Controller

PRICE :$ 525.00

OVERVIEW
AEM's 4-Channel Wideband UEGO Controller is a powerful, cost effective tuning tool that allows users to monitor the Air/Fuel Ratio (AFR) of up to 4 individual cylinders simultaneously (or up to 12 cylinders if multiple units are paired together). This unique controller features an optional exhaust back pressure compensation* kit to correct AFR readings of Wideband sensors mounted pre-turbo. The system includes stainless steel bungs specially designed for use in individual port applications which feature a finned stand-off design which both cools the sensor body and minimizes exhaust port restriction. The 4-Channel Wideband UEGO controller is ideal for datalogging, engine management systems or racing applications where individual cylinder trims are needed. The system features simple wiring and installation with 0-5v analog outputs for each AFR channel as well as a CAN datastream output. The controller is shock & weather proof and can be mounted anywhere in or outside the vehicle.

MAXIMIZE ENGINE POWER AND SAFETY
When tuning an engine, accurate Air/Fuel Ratio data is critical. Running rich can cause a loss in power, while running too lean may result in serious engine damage. The AEM 4-Channel Wideband UEGO Controller is a must for anyone using an engine management system or data logger to monitor individual cylinder AFR in an effort to maximize engine power and safety. Many modern engine management systems, including the AEM EMS, are capable of utilizing individual cylinder fuel trims and the 4-Channel Wideband Controller provides tuners with the precise information required to tune each cylinder to a targeted AFR. AEM's innovative exhaust back pressure compensation feature* allows the wideband sensors to be mounted in each exhaust runner pre-turbo, which eliminates the need to measure an average AFR over multiple cylinders on turbo charged applications. The system can be integrated with almost any data logger or engine management system through 4 unique differential analog outputs or the AEM CAN datastream output. The Bosch 4.2LSU sensors, which give the controller its speed and accuracy, are laboratory calibrated at the factory and never require free air calibration! The unit features a shock and weather proof housing, allowing it to be mounted virtually anywhere in the vehicle without worry.

KEY FEATURES

No free air calibration required - ever
Four unique differential analog outputs
CAN output for use with AEM EMS or CAN enabled devices
Exhaust back pressure compensation to correct AFR readings on wideband sensors mounted pre-turbo*
Multiple units can be paired together for use on 6, 8, 10, 12 or 16 cylinders
Two status lights per sensor for error detection and operating status
Stainless steel bungs specially designed for use in individual port applications which feature a finned stand-off design which both cools the sensor body and minimizes exhaust port restriction
Compact (4.8" x 4.55" x 1.44"), weather & shock proof enclosure
Accurate to 0.1 AFR
Reads Gasoline values from 8.5 to 18:1 AFR
Reads E85 values from 5.7 to 12:1 AFR
Reads Ethanol values from 5.2 to 11:1 AFR
Reads Methanol values from 3.7 to 7.8: AFR
Reads Lambda values from 0.58 to 1.22 AFR

* AEM Performance Electronics Exhaust Back Pressure Sensor kit part #30-2064 is offered as an option and sold separately.

4-CHANNEL WIDEBAND UEGO CONTROLLER KIT CONTENTS

4-Channel Wideband UEGO Controller
Complete Wiring Harness
1 X Wideband UEGO Sensor with Stainless Tall Manifold Bung Install Kit (additional sensors & bungs sold separately)
Installation Instructions

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AEM EMS4 Plug-N-Pin Kit (Pre-wired for Power, Ground, CAN & USB Coms) - $ 99.00

AEM EMS4 Plug-N-Pin Kit (Pre-wired for Power, Ground, CAN & USB Coms)

PRICE :$ 99.00
Pre-wired for power, Ground, CAN & USB Coms

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AEM EMS4 Universal 4 Cylinder Standalone ECU - $ 759.00

AEM EMS4 Universal 4 Cylinder Standalone ECU

PRICE :$ 759.00

AEM’s EMS-4 Universal Standalone Engine Management System is designed for use on modified Powersports and four-cylinder race car applications. With its weather/shock proof enclosure and specially designed 36-pin connector, the EMS-4 is equipped to operate in harsh environments and can be mounted anywhere.

4 Saturated Injector Drivers
4 Coil Triggers
8 General Purpose Inputs/Outputs
Mag or Hall Cam and Crank Inputs
O2 Input
Knock Input
8 MB Internal Data Logger
CAN Data Stream
Utilizes AEMTuner Interface Software

KEY FEATURES

4 Saturated Injector Drivers
4 Coil Triggers
8 General Purpose Inputs/Outputs
Mag or Hall Cam and Crank Inputs
O2 Input
Knock Input
8 MB Internal Data Logger
VSS Hall Input
Can Data Stream
USB Comm Port
Compact (4.8" x 4.55" x 1.44"), weather/shock proof enclosure
Utilizes AEMTuner Interface Software
System is fully enabled and unlocked – Never pay for Upgrades
Context Sensitive Help Eases Tuning Process
Maps can be Password Protected by the Tuner to Prevent Unauthorized Usage Sharing
Data analysis using AEMdata software. Click HERE for more info on AEMdata!

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

Latest Products in Engine Management

AEM 4-Channel UEGO Controller - $ 525.00

AEM EMS4 Plug-N-Pin Kit (Pre-wired for Power, Ground, CAN & USB Coms) - $ 99.00

AEM EMS4 Universal 4 Cylinder Standalone ECU - $ 759.00